To download these
files and upgrading BSP on Kona Mega Gateway, login using an FTP Client and Use
an FTP client (such as Filezilla from https://filezilla-project.org/download.php?type=client).
Note that, we have
recently changed our FTP site to use encryption (FTPS or FTP over TLS), as well
as added a domain name. Thus, use FTPS (or FTP over TLS) via
FTP client such as filezilla to ftp.tektelic.com.
Accounts and passwords remain the same. The only change you may need to
make is to set filezilla to use FTPS, like shown in attached image.
Navigate to the
correct directory: /Kona_MEGA_SW/BSP_4.3.2
Please refer to the
software update guide for instructions on how to update. The update guide is
included in the FTP site and is also available in the Knowledge Base.
Basic Station in this BSP (Basic Station v1.5.1-r66)
requires “report_count”: 1 field in the config.json file (it has to be added
manually under gateway_conf in the file).
Without this field, it will not sync with Packet Forwarder .
As a result, it will not process
uplinks packets and send to Network Servers.
Therefore, Basic Station package included in this BSP should not be used with previous BSP.
Units with BSP v4.1.2 out of the factory will be available at a later date in the near future.