Assigning Static IP to Kona Gateway using KonaFT

Assigning Static IP to Kona Gateway using KonaFT

To assign Static IP address to Kona gateways (Micro/Macro/Mega) using KonaFT, below is the procedure.

1. Access gateway using KonaFT.

2. Select Board Details->Misc tab.

3. Then go to Network Configuration section.

4. Select "Static" from drop-down menu and enter static IP in "IP Address" field, and provide Netmask, Gateway (default gateway address), and DNS entries.

5. Select "Set" button.

6. Reboot the Gateway.

*NOTE: You may have to enter a DNS address for the static IP to be set properly.

    • Related Articles

    • Kona Gateways BSP Upgrade using KonaFT

      This article describes the procedure to upgrade the BSP(firmware) of Kona Micro/Macro/Mega gateways using KonaFT. Kindly note that this document does not apply to the Kona Pico Gateway. Drop Files to Attach
    • Kona Mega Gateway User Guide

      To download user guide for Kona Mega gateway, please go to attachment section.
    • Kona Macro Gateway User Guide

      See attachment for current Kona Macro User Guide
    • Kona Micro FAQ

      #1 Accessing the battery and SIM slot To access the battery and SIM slot on the Kona Micro first unplug the AC power and Ethernet connections. Next, remove the two Phillips screws on the back of the module. A Phillips #1 screwdriver is required to ...
    • KonaFT Application

      Kona FT V0.43 is the current version of KonaFT. To use all of the features available in this tool, please upgrade your gateway to the latest available BSP. The installation package is attached to this article.  *To use all of the features available ...