Cellular Interface Configuration on Kona Macro Gateway

Cellular Interface Configuration on Kona Macro Gateway

To access the document outlining the procedure to configure cellular interface on Kona Macro Gateway, you can go to attachment section of this article.
    • Related Articles

    • Cellular Interface Configuration on Kona Micro Gateway

      To access the document outlining the procedure to configure cellular interface on Kona Micro Gateway, you can go to attachment section of this article.
    • Kona Gateway Cellular Backhaul FAQ

      This article applies to Kona Gateways with cellular backhaul featured. You can find gateway specific FAQs here: Kona Micro / Micro PoE Kona Enterprise Kona Macro Kona Mega General FAQ Cellular Backhaul FAQ (you are here) Network Monitoring FAQ ...
    • Kona Macro Gateway User Guide

      See attachment for the current Kona Macro User Guide.
    • Kona Gateway Network Monitoring FAQ

      This article applies to Kona Gateways with cellular backhaul featured. You can find gateway specific FAQs here: Kona Micro / Micro PoE Kona Enterprise Kona Macro Kona Mega General FAQ Cellular Backhaul FAQ Network Monitoring FAQ (you are here) ...
    • Kona Macro FAQ

      #1 Why is minimum reported RSSI -125dBm? The RSSI value is reporting the sum of the receive power plus the noise in the channel. So for the cases of low or negative SNR, the RSSI value will be dominated by the thermal noise in the channel (+ noise ...