Cellular Interface Configuration on Kona Micro Gateway
To access the document outlining the procedure to configure cellular interface on Kona Micro Gateway, you can go to attachment section of this article.
Related Articles
Cellular Interface Configuration on Kona Macro Gateway
To access the document outlining the procedure to configure cellular interface on Kona Macro Gateway, you can go to attachment section of this article.
Kona Micro Gateway User Guide
See attachments for the following: Kona_Micro_UG_gen1.pdf - User Guide for Kona Micro Gen1. Kona_Micro_UG_gen2.pdf - User Guide for Kona Micro Gen2.
Configuration of Basic Station for Kona Micro Lite Gateway- TTNv3
To download binary file required to support Basic Station interface on Kona Micro Lite gateway for TTNv3 along with instructions for installation, please see the attachment below. Attachment section contains two files as described below. ...
Kona Micro FAQ
#1 Accessing the battery and SIM slot To access the battery and SIM slot on the Kona Micro first unplug the AC power and Ethernet connections. Next, remove the two Phillips screws on the back of the module. A Phillips #1 screwdriver is required to ...
Kona Micro 2.0 POE Gateway User Guide
See attachments for a copy of the Kona Micro 2.0 PoE User Guide *Note, only the Kona Micro 2.0 PoE version of the Kona Micro supports PoE. Please ensure that your Kona Micro gateway is a PoE supported model before proceeding.