Configuration of Basic Station for Kona Micro Lite Gateway- TTNv3
To download binary file required to support Basic Station interface on Kona Micro Lite gateway for TTNv3 along with instructions for installation, please see the attachment below. Attachment section contains two files as described below.
File
| File Name
|
1) Configuration of Basic Station on Kona Micro Lite gateway
| Kona_Micro_Lite_BSTN_configuration_v2.0.pdf
|
2) Basic Station Binary file
| bstn-4baeec1-release .bin
|
Related Articles
Configuration of Basic Station for Kona Micro Lite Gateway- AWS IoT
To download the binary file required to support the Basic Station interface on the Kona Micro Lite gateway for AWS IoT along with instructions for installation, please see the attachment below. The attachment section contains two files as described ...
Kona Micro-Lite / Pico GW Configuration User Guide
To view the current version of the Micro-Lite Configuration User Guide please see the attachment below: In the attachment section, zip file can be found that contain binaries for New Firmware for Kona Micro Lite GWs. These Zip files contain bin ...
Basic Station Interface for TTNv3
See the attachments for the following: KonaGW_TTN_BSTN_Guide_v3.pdf - guide on how to install and configure Tektelic BSTN for TTNv3 (for Kona Micro/Enterprise/Macro/Mega). config.json - A config.json file for the 2nd US915 sub-band. Only needed for ...
Kona Micro-Lite / Pico GW FAQ
Question Solution I see my Micro Lite GW is showing up as "Offline" on the Network Server even though the LED is not flashing, why is that? The Micro Lite GW by default will state its status as "Offline" until sensors have been joined and ...
Kona Micro Lite Gateway Quick Start Guide
To view Kona Micro Lite Gateway's Quick Start Guide, please refer to attachment section.