Configuration of Basic Station for Kona Micro Lite Gateway- AWS IoT

• Related Articles

• Configuration of Basic Station for Kona Micro Lite Gateway- TTNv3

  To download binary file required to support Basic Station interface on Kona Micro Lite gateway for TTNv3 along with instructions for installation, please see the attachment below. Attachment section contains two files as described below. ...

• Basic Station Interface for AWS IoT core for LoRaWAN

  See attachments for the following: KonaGW_AWS_BSTN_Guide_v4.pdf - Guide to connect a Kona Gateway (Enterprise/Micro/Macro/Mega) to AWS IoT Core. KonaGW_AWS_BSTN_ExampleApp_v1.pdf - Guide to create a simple application for alerts and visualization of ...

• Kona Micro-Lite / Pico GW Configuration User Guide

  To view the current version of the Micro-Lite Configuration User Guide please see the attachment below: In the attachment section, zip file can be found that contain binaries for New Firmware for Kona Micro Lite GWs. These Zip files contain bin ...

• Basic Station Interface for TTNv3

  See the attachments for the following: KonaGW_TTN_BSTN_Guide_v3.pdf - guide on how to install and configure Tektelic BSTN for TTNv3 (for Kona Micro/Enterprise/Macro/Mega). config.json - A config.json file for the 2nd US915 sub-band. Only needed for ...

• Kona Micro-Lite / Pico GW FAQ

  Question Solution I see my Micro Lite GW is showing up as "Offline" on the Network Server even though the LED is not flashing, why is that?   The Micro Lite GW by default will state its status as "Offline" until sensors have been joined and ...