Instructional Videos for BLE Beacon

Instructional Videos for BLE Beacon

Below are description and video links showing process of activating and putting sensor back to sleep for BLE Beacon

Video 1: Waking Up

·         No LED activity at first.

·         Locate the magnet symbol on the end cap.

·         Place the magnet on the body of the enclosure adjacent to the magnet symbol as shown.

·         Hold for 5 FULL seconds then remove magnet.

·         After another 5 seconds, the green LED will flash slowly 3 times.

·         After another 3 seconds, the device will reset and begin the normal join procedure.

 Link: Activating BLE Asset Tracker


Video 2: Activating sleep mode

·         Device must be in the process of trying to join the network (rapid green LED flashes with a red LED flash every 10s).

·         Locate the magnet symbol on the end cap.

·         Place the magnet on the body of the enclosure adjacent to the magnet symbol as shown.

·         Hold for 5 FULL seconds then remove magnet.

·         After another 5 seconds, the rapidly flashing green LED should stop.

·         After another 3 seconds, the device will reset (both red and green LEDs come on briefly) then the greed LED will flash quickly 3 times.

·         The device is now in DEEP SLEEP mode.


    • Related Articles

    • KonaFT Instructional Videos

      Some Instructional videos were created to assist first time KonaFT users. Please see the attached video files provided in MP4 format. KFT_Connect describes how to launch and connect KonaFT to a gateway KFT_Load_Files describes how to load files onto ...
    • Tektelic Network Server- Instructional Videos

      This article contains instructional videos demonstrating various features available on Tektelic NS. Below are the instructional videos, which can be found in attachment section: 1.  Commissioning Kona Home Senor on Tektelic NS 2. Commissioning Kona ...
    • BLE Beacon Quick Start Guide

      To view the current version of the BLE Beacon Quick Start Guide please see the attachments
    • BLE Beacon Technical Resource Manuals (PELICAN) (SPARROW)

      To view the BLE Beacon Technical Resource Manuals please see the attached documents. *Please note that: TRM v1.X corresponds to FW v1.x.x and does not include Beacon support. TRM v2.X corresponds to FW v2.x.x and includes Beacon support.
    • BLE Beacon (Non-ATEX) User Guide

      To view the current version of the Enterprise Asset Tracker (Non-ATEX) User Guide, please see the attachments