Kona Gateways BSP Upgrade using Tektelic OAM Server

Kona Gateways BSP Upgrade using Tektelic OAM Server

This article describes the procedure to upgrade the BSP(firmware) of Kona Micro/Macro/Mega gateways using Tektelic OAM server. Kindly note that this document does not apply to the Kona Pico Gateway.
    • Related Articles

    • Kona Gateways BSP Upgrade using Tektelic Network Server

      This article describes the procedure to upgrade the BSP(firmware) of Kona Micro/Macro/Mega gateways using Tektelic Network Server. Kindly note that this document does not apply to the Kona Pico Gateway.
    • Kona Gateways BSP Upgrade using KonaFT

      This article describes the procedure to upgrade the BSP(firmware) of Kona Micro/Macro/Mega gateways using KonaFT. Kindly note that this document does not apply to the Kona Pico Gateway. Drop Files to Attach
    • TEK OAM Server FAQ

      #1 How can I configure Kona Gateways to work with TEK OAM server while using third-party NS? Below are instructions to configure the gateway to use TEK OAM server while using third-party NS. Go to /etc/default/mqtt-bridge.conf file through KonaFT as ...
    • Tektelic OAM Server User Guide

      Attached document describes various features supported by Tektelic OAM server.
    • TEKTELIC Network Server FAQs

      #1 How can I request an access for Tektelic NS? To request for an access of Tektelic NS, you can raise a support ticket on Tektelic support portal. Upon receiving support ticket, Tektelic team will create an account for you on Tektelic NS. #2 My Kona ...