Kona Micro-Lite / Pico
Configuration of Basic Station for Kona Micro Lite Gateway- AWS IoT
To download the binary file required to support the Basic Station interface on the Kona Micro Lite gateway for AWS IoT along with instructions for installation, please see the attachment below. The attachment section contains two files as described ...
Kona Micro Lite Gateway Quick Start Guide
To view Kona Micro Lite Gateway's Quick Start Guide, please refer to attachment section.
Configuration of Basic Station for Kona Micro Lite Gateway- TTNv3
To download binary file required to support Basic Station interface on Kona Micro Lite gateway for TTNv3 along with instructions for installation, please see the attachment below. Attachment section contains two files as described below. ...
Configuring and Commissioning Kona Micro Lite Gateway on TTN
Attached document describes step by step procedure for configuring and commissioning Kona Micro Lite gateway on The Things Network(TTN). Required configuration files can also be found in the attachment section of this article.
Kona Micro-Lite / Pico GW Configuration User Guide
To view the current version of the Micro-Lite Configuration User Guide please see the attachment below: In the attachment section, zip file can be found that contain binaries for New Firmware for Kona Micro Lite GWs. These Zip files contain bin ...
Kona Micro-Lite / Pico GW FAQ
Question Solution I see my Micro Lite GW is showing up as "Offline" on the Network Server even though the LED is not flashing, why is that? The Micro Lite GW by default will state its status as "Offline" until sensors have been joined and ...